Hub For Smart Home Devices | ArenaHub
Connect with us

Smart Home

How To Setup Wireless Doorbell

Avatar of ArenaHub



How To Setup Wireless Doorbell

How To Setup Wireless Doorbell

Home automation is the most popular new trend in the house improvement market with a greater number of technological advances. Home automation is a way to run your private home automatically. This central computerized control of the property allows house owners a deliberate method of going about household duties. With one press of your mouse or flip on the switch, it is possible to let your property run by itself.

Your house automation system mechanizes your complete house by activating sprinklers at a specific time of the day, activating this cooling/heating system based on the internal room temperature, deactivation of heating/cooling system automatically when somebody is in, shifting to energy-conserving mode if the home is unoccupied, flipping on the lights belonging to the driveway once your cars pull in say only from 7 pm to 1 am and more such functions.

How To Setup Wireless Doorbell

Home automation is usually considered to get two categories: The first is security not surprisingly and the second is convenience or gadgets for home convenience.

Smart home wireless video doorbell automation system is made of two main parts: the controlling system which is certainly the Central Processing Unit (CPU) and an individual-operated device which is a trigger or remote. The CPU is generally installed in one place at home and anyone communicates in it via handheld pads, touch screens (installed or handheld), or remotes. Every home automation system has varying features, operations, intelligence, flexibility, and operations dependent upon the price and sophistication of the system.

Today’s technology is making up ground for that which we used to see in movies a little while ago. A few years back, we would not have dreamed of owning automated devices in our homes that we might review at any time.

From whichever place natural meats be. From the bedroom, in your car, from work to a fitness center, and so on. All we should do now is tune in to your fancy modern automated gadgets and link them to our smartphones.

There you might be! Instant access to your property security system, heat switches in your own home, those fantastic TVs, VCRs, and even the lights in your kitchen.

Most of these conveniences formerly were available in richer, more developed countries. However, nowadays, you may see yourself a semi-pro home security system for a small amount of under $100, using the internet.

You may believe that for that sort of cash, the gadgets you pay for are not going to be breathtaking, but curiously, that’s not the case. $100 buys you security for one home with eight sensors for windows, a voice dialer module, and motion detectors.

Moreover, it is typically linked to your mobile device via the net as well. This lets you reduce false alarms by providing an opportunity to be handled by sounds as part of your home. Plus, you can preset around four telephone numbers to become dialed automatically in case there is an alarm.

Many smart home wireless video doorbells can be found in most Do It Yourself stores, and all for accessible prices. Not all professional services are required to install and hang up an automation system in your home. Entire kits already exist that enable every determined owner to apply them, then, set up and hang up their own efficient, fun gadgets and systems.

How To Setup Wireless Doorbell

How To Setup Wireless Doorbell

How To Setup Wireless Doorbell

Step 1: Gather Installation tools

Every doorbell product kit contains different bonuses, they all come with pretty much everything you need to install your doorbell, including a screwdriver, screws, a charging cable (if needed), and installation instructions.

In addition to these, you may need a drill if you have to screw your Ring Doorbell into brick or stucco. A Box cutter or flathead screwdriver should also be available to help you remove your old doorbell (if it exists).

Step 2: Charge the battery

After unboxing your security Doorbell, locate the battery and plug it into power using the included charging cable. We understand that getting the battery out of most security doorbells can be tricky because some are designed for easy pop-out after the doorbell has already been installed.

For products like Ring, we suggest that you hold it against a flat vertical surface (like a wall) to remove it. The wall helps to push the battery out and gravity helps it drop into your hand.

Once the battery is plugged in, you will see a red light and a green light to indicate the battery is charging. Charging duration may last four to six (4-6) hours, so be patient. Once the battery is fully charged, the red light will turn off and you’ll have the green light to get started with the installation.

Step 3: Connect to the internet

Download your product app (e.g. Ring) then follow the onscreen instructions to link your Video Doorbell to your home’s Wi-Fi network. The app will guide you via everything you need to do, and it takes approximately 10 minutes to get it all set up and connected.

Step 4: Shut off power

Locate your home’s breaker box (usually in a garage, basement, or in the rear of your home, This option may differ from Homes and Countries) and shut off power to your doorbell. This is for safety reasons assuming you’ll be working with exposed wiring.

If you don’t have an existing doorbell and hence won’t be tampering with wires Skip this step. Several doorbell cameras use batteries, so hardwiring is optional. You can check our next post – How to Install a Hardwired Video Doorbell

How To Setup Wireless Doorbell

Step 5: Remove the old doorbell (Skip This part, if you don’t have an old doorbell)

With the help of a screwdriver or boxcutter, remove your old doorbell’s faceplate exposing the screws (if applicable). Unscrew the old doorbell from the wall and gently pull it out, exposing the two power wires.

The doorbell wires should still be wound around screws on the inside of the old doorbell, so be careful with this part, as you don’t want to damage these wires by pulling too hard. Loosen the screws to detach the wires and take the old doorbell off completely.

Step 6: Connect the mounting bracket

At this juncture, your wall should just have the hole where your old doorbell used to be, with the two doorbell wires hanging out. Before you attach your mounting bracket, open your Doorbell app and the doorbell’s live video feed.

  • Hold your Doorbell up against the surface over the hole in the same spot where you’re going to mount it and check the picture on your phone to make sure you’re getting the angle you want. If you’re not, now is the time to use one of the angled mounting brackets to tilt the camera up, down, left, or right.
  • Once you’ve decided on placement, use the included level tool to make sure the mounting bracket is straight, and use a pencil to mark the location for the new screw holes. Once they’re marked, remove the level.
  • If you’re using an angled mount, go ahead and attach it to the wall first by screwing it in, then attach the mounting bracket to it. Otherwise, screw the mounting bracket directly to the wall over the hole left by your old doorbell so the wiring comes through the bracket’s hole.

Note: If you’re installing on brick or stucco, you’ll need to use the included masonry kit to drill holes for the small, white plastic anchors that hold screws in place. After you drill the holes in the locations you marked, push the anchors in, position the mounting bracket on top of them, and then screw the mounting bracket screws into the anchors. If you have wood or vinyl siding, don’t worry about using the anchors.

Avoid tightening the screws too much when attaching the mounting bracket or it might bend, making it hard to snap your Doorbell in place.

Step 7: Attach doorbell wires (optional)

If you want to connect your Ring to your current doorbell chime to prolong its battery life or make your chime ring when a visitor presses the doorbell button, you can now attach those two doorbell wires to your Ring.

If you don’t have an existing doorbell, you can skip this part. Just make sure you purchase a Ring Chime for a traditional doorbell experience. Otherwise, you can rely on phone notifications to alert you when someone’s at the door.

First, loosen the two screws on the mounting bracket located directly over the hole where the wiring is sticking out of your wall. Then, take the wires and wrap one around each screw—it doesn’t matter which one, as long as the wires aren’t touching. Make sure each has a good connection to the screw. Tighten the screws gently if needed. Congratulations! You’ve now closed the circuit.

Note: If you have a digital doorbell chime (one that makes more of an electronic two-toned sound than the traditional “ding dong” chime), then this is the perfect time to attach the included diode. Check your installation instructions for more information about this step.

Step 8: Mount Ring doorbell

Once you are done with the previous step, go ahead and mount your security Wireless Doorbell.

Step 9: Restore power

Just as you shut down power for safety reasons before installation. Once you are done with your electrical installations and mounting of doorbell, restore power.

Step 10: Set app preferences

Customize your app preferences and set them to your taste.


In conclusion, home automation has come a long way and has become quite affordable for homeowners to install their own smart home systems. The ability to automate household tasks, control security systems, and access home devices from anywhere has become a reality for many. The installation and Setup of a Wireless Doorbell is an excellent addition to a home security system. Installing one is quite easy, and the device can be controlled using a mobile app. This technology provides homeowners with peace of mind and the ability to stay connected to their home while away. As technology continues to advance, the possibilities for home automation are endless.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *